- How Do I get into the.................
- Reading rom with ECUflash
- Ecuflash Glossary
- Connecting to the OBD Port and Flash Connector
- Make a coupler for EVO4-6
- How to: Reading from an Mitsubishi ECU using Ecuflash
- How do I set up static rev limit?
- Code changes required for Evo 1-3 launch control
- Code changes for Evo 1-3 ALS with launch control
- run e85
- alter xml to disable the immobiliser
- Fitting an Ostrich to an early Evo
- ecu flash
- How do I change the load scale in Fuel Maps
- Twin maps
- Using early evo tunerpro software
- MAF values
- Gems
- ECU numbers
- Flash an E6 ecu fitted to an E4??
- early Evo A/C rpm-indicated cut off, others
- Tephra and 93660005
- How do I decide which Tephra ROM
- ecuflash
- Launch controll + Antilag On/Off
- EVO6 Car running EVO7 ECU..How to ALS
- EVO 7 Switching Harness - where can i buy?
- NLTS in an EVO 6
- evo 7 pops n bangs don't work
- early evo ecu swap
- A Little Help Needed Please
- Fiesta Diesel - OBD2
- new to mapping.
- idiots guide to ostrich?
- SD Mod Evo VIII 260 ECU
- how does this work?
- LM2 work with Evoscan
- Evo 5 with ECUFlash - how do I change boost?
- Making new load columns?
- Reading Evoscan log files
- evo eight e c u on evo four
- No pops an bangs evo 7 ecu
- evo launch control difficulties
- ecu corrupt via flat laptop
- Innovate LC1 on evoscan
- Evo 9 file cant open up not sure about xml ?
- Logging boost on an evo 8
- The NEW Evoscan 2.7 and OpenPort 2.0
- E4 pin 79 how to....no, literally how to??!!
- roms/xmls and how/where to save them?
- Where do i start with my EVO6 TMC
- Needs the help. EcuFlash reads but does not write.
- custom rom def file
- help for a newbie
- Legnum VR4 Help
- Evo X JDM
- Newbie with a early EVO 3 ECU load scale questions.
- Which ecu data cable??
- Evo X GSR SST 2008 XML
- 08 EDM Lancer GT (xml)
- connect my 1.3 cable
- Unknown Rom Image help please
- Adjustable cam gears
- anyone map scoobys
- Pops & bangs on Early Evos
- help for a read image
- need help
- protect my own map
- evo sst ecu key issue
- Geekmapper in Bham area
- How do i get ecuflash to work with windows 7
- Newbie Questions
- ALS settings like this
- Beginners guide to geekmapping ?
- Manually add power to pull rom?
- Periphery config....
- mitsulogger wont connect
- will a bad front O2 senser
- How do I switch ROMs ?
- Eclipse w/ ED14 EPROM
- EVO 1-3 Closed and open loop lambda issue.
- evoscan setting up
- 510 injectors
- fc commander
- Newbie to mapping.
- usbser.sys bluescreen crash
- evo 5 ecu into evo 2
- evo 7 4 plug into 5 just checkup
- Big map translator
- how to log wb through ecu, evo 8
- Ecuflash & Evoscan on JDM TME
- Teprah mods switching between maps
- Changing idle speed on Evo 1
- Can an uber Geek put my maps etc on a new ROM?
- Mapping out idle drop due to BOV
- Need help with selection of bits & pieces
- reading evo x flash with ecuflash v1.42 and tachtrix 2
- tactrix licence key
- please help fitted evo7 ecu to my evo4 runs great but wont flash
- Tephra mods