- Evo IV problems (VII Ecu)
- Evoscan not recognising LC-1?
- 1st stupid question?????
- Tephra
- galant/legnum vr4 xmls
- Flashing Cables and Vehicle Support
- 1st really stupid question??????
- map switching
- Mitsi E5/E6 ECU Processor
- Copy/paste rom?
- Fault code reading with Evoscan?
- Evoscan dropping logging connection?
- E5/6 Flashing
- 2 byte and 1 byte load
- ecuflash v1.41 probs
- ecuflash xmls
- What are you using for datalogging? My cable doesn't work.
- evo 4 ecu
- changing values on ecuflash????
- ecuflash licensing
- i'd love to have valet on a switch?
- slow knock cel flash
- bin xml etc!
- limitless/tactrix cable
- Valet Mode/Cel on Knock - How to?
- What kit do i need!
- where do i start?
- Evoscan map tracer
- knock
- 2 byte load question
- Scooby ecu unlocker
- Changing my ecu
- Tephra mod options???
- Autronic SM4 Vs Standard VI ecu
- Main ECU flash affect gearbox?
- EVO x SST (what am i doing wrong.?
- help evo 7 to evo 6 ecu
- soldave's Evo I tuning thread
- What is needed?
- Etacs
- tactrix cable
- Ecuflash 1.41 reading evo 6
- fault code reading
- Newbie XML & Rom Questions
- pros + cons of running no closed loop
- Mapping Diary / Questions for the geeks
- Safe to flash RA map?
- Raising boost
- rev limiter
- Fitting Innovate LM1 nad DB gauge
- map tracer load scale
- XML Definition file
- e8 (260) rad fan control.ecu?
- Ecu
- E8 260 ECU into E4 Swap
- Knock Control Settings/Loads
- would it be better to?
- patchy wideband logging
- map smoothing
- evo 7 jdm 98640014
- Problem opening ROM
- Boost control levels
- e5/e6 RA rom
- disabling egr/purge faults p0403+443
- E5 Flash Problem/ will not let me flash anymore ?
- lc1 location
- Reading scoob ecus
- logging without a laptop
- evoscan graph scales
- Anybody got....???
- Boost cut
- Adding GM 3Bar MAP 8 ECU
- Ecuflash and evo X
- Disabling knock control on noisy/tappety engines
- Error when trying to connect to my E4 help!
- VI mods
- Load value confusion
- Vi ecu into IV ecu case
- Should i de-cat?
- xml files????
- Logging Boost
- Alt Maps not working
- how am i doing???
- gaps in wideband logs
- wiring change for evo 8 3 plug into evo loom
- scantech
- Tephra mod for JDM Evo 8?
- ROM in Evoscan
- EGR which pin on ecu
- [Help] Can't connect to my E6
- Removing Pops and Bangs from E7 Ecu
- Total Newbie questions! Evo MR 360
- Boost desired engine load & Max waste gate duty
- what chav sent me timing map with minus figures
- Am I running to rich??
- ECUflash wont open my rom?
- Evoscan - ABS reading problem
- Evoscan dash templates
- No options in the 'Read' pop up box...
- best RA rom and xml for a 7
- vr-4 legnum/galant rom+xml
- Load is still not recording a valid figure
- Any News Regards The 7203F Chip Issues
- what happens if you try to write to ecu with car running?
- Evoscan
- fuel map (target afr's)
- Adjusting fuel pump voltage?
- Changing from VTA to Re-circ
- Lc1/xd16
- Whats required for new cams
- Can you change ICS settings in stock 8 ROM?
- Text from ROM via EcuFlash
- map tracer
- Conversion to S-D and other Q's
- Settings advice for 'ALS'...
- Possible 'phantom knock'?
- 3 bar map
- wide band sensor position?
- Evoscan and Windows Mobile support...
- Hi im new
- 2 Byte on evo 6?
- Evo 3 ecu
- Problems with VII ecu
- How essential is a remap......
- Load 1Byte playing up
- logging manifold intake temp
- Pops and bangs not working
- HKS 272 cams
- Mut
- Issue getting rom to display in Ecuflash
- Is this a recipe for problems?
- Exhaust probe accuracy
- Which ROM?
- Launch control activated when car is moving
- EVO8 flashed into EVO4 still not running!
- How do I use map tracer?
- evo IX jdm map sensor
- access to every rom id?
- Pin 79
- changing load in fuel/ign maps
- ostrich 2.0 files
- Hex editors
- Non start on Tephra e7 flash
- UK V2.0 Cable Supplier
- Can you map for torque?
- 90550001 v5 plus knock tables
- can i make alterations to a rom that has been ecutk'd?
- wiring help
- can we host all known rom id's and working xml's
- lean spool off = adjust whole fuel map?
- mapping live or not..
- boost
- def file
- Fto ?
- gm 3 bar map sensor
- Random Knock!!
- AYC fault
- Mut Monitor V2.4 Logging Knock
- Low rpm bogging with big cams?
- Boost limit settings
- what defintion file for ecu MN132623
- Openport 2 interface problem
- Launch control VII ecu
- Evo 7, ECUTEK'd help to make adjustments
- Hello Geeks.......only joking!!!
- wideband kit
- Rnadom AFR on a DC5
- Need file for JE351B153D
- ecu remapping help and advice needed
- Need a few pointers / fresh geek
- Vag-Com cable compatible ?
- Definition file (xml)
- Evo 5 with Evo 7 ECU
- A/C fan power on ?
- where can i get some decent cans?
- engine damaged on EVO3.
- Which stand alone ECU on EVO3?
- changing invecs2 auto gearbox to a manual 5-speeder
- Extinguishing cel after VII ecu swap
- Map for 95ron
- Newbie alert
- Dawes Device
- remove/add rom on my evo
- activate ALS on EVO IX
- Acer 6.8" notebook
- problem with log
- need XML
- openport connection problem
- logging speed
- fuel map / wideband readings.
- the legend cometh to the midlands ?
- What is needed to use 272 cams on EVO 3 ?
- Will i ever be able to connect to my X
- Mapping a E7 RA ECU
- Lean Spool
- What method do you use to adjust ignition timming?
- Tatrix cable issue??
- Need clean def file please
- tesco 99 or vpower?
- adding timing
- Lean Spool on Evo 6
- Dtc p0513
- ECU RPM signal convert to pulse - Help please.
- Definition file for this ROM, please help
- windows vista/evoscan issue
- Some doubts related with EvoScan.
- Need help
- Lean Spool
- Log boost, Evo 7, Apexi Map Sensor??
- 3 Port Boost Control and Logging
- TunerPro XDF Request
- Intermittant Power Loss
- Logs from my 5rs
- boost limit with 3 port on stock ecu
- LC-1 with openport 2.0
- evo 8 launch control
- Pins of a twin map
- Engine load in evoscan
- ecu swap to early evo
- Logging/controlling boost with HKS EVC 6
- radiator fan problem when swapping ecu's
- Evo X SST torque limiter
- Greddy Profec spec 2 solenoid with ECUFLASH?
- XML definition question
- how do you sclae maf's when changing intakes
- Fq320-340-360
- Modifing the ROM whilst driving? possible?
- LC1 wide band
- using ecu from an 8 in a 6
- Haltech / GM air temp sensor
- Load axis rescaling / lifting
- Octan Flag - What it means how to use it?
- compressor surge?????
- A quick one
- tephra V6 or V7 for 9055?
- Help - ive dowlaoded this from ECU
- Problem modding a uk E6
- Tuning without MAF...
- Evo7 def file ?
- Datastream Specifications GSR Evo 1, 2, or 3
- Can some one upload STD evoIII bin file...
- Evo VII into Evo IV (ECU)
- Tephra MOD OPTIONS
- E7 GTA running rich...
- Injector latency adjustment
- Rom
- Seeking knowledge of the wise ones :D
- Boost controller accuracy
- lazy lambda probe
- Bin file for more than 16psi