Where do i start with my EVO6 TMC

[palmeros]

Hey guys iv just purchased an evo 6 tommi mak, i needto know what do i need to start logging etc on my ecu what cables and where from? and basic files etc to upload onto my ecu. the car is totallt std,
Im use to using tunerpro etc as i have an evo with ostritch etc.
Also what kinda boost sollenoid will i need to up the boost on this car?

thanks for the help.
andy

[sbn1979]

programs

evoscan - from limitless.nz - £10
ecuflash - free

hardware

openport 1.3U or tactrix 2.0 - £100+ aprox
afr gauge - £150 +


avcr is the best controller imo

[todd]

op2 for 5/6 ecu 1.3u wont flash em

[straightliner]

Is the TMC ecu flashable ?? I'd heard they used a different chipset

[evonut270]

Is the TMC ecu flashable ?? I'd heard they used a different chipset

:lol:
http://www.geekmapped.com/forums/showthread.php?t=1488

[HermaN]

Also, unless you want to do lots of messing around, contact Hamish on limitless.co.nz and ask him for the EvoScan 2.7 BETA after you have bought 2.6, will make your life MUCH easier, because EcuFlash 1.43.3000 BETA uses different drivers that don't work with EvoScan 2.6, and you need EcuFlash 1.43 to map a TME ECU.

So you'll either be able to log OR flash the ECU with the EcuFlash 1.43 & EvoScan 2.6 combo.

[straightliner]

:lol:
http://www.geekmapped.com/forums/showthread.php?t=1488

Missed that :)

[palmeros]

thanks for that guys :) will i actually need a boost controller and wideband? iv got both on my evo 2 but dont really wanna put anything inside the car i wana try make it look original, cant you use the ecu to controll the boost with 3 port boost solenoid?

andy

[palmeros]

is there any how to guides for this? as in from when i get the cable what to expect when connecting to the obd port and just tips etc?

thanks andy