Evo X JDM

[RJSP]

Hi guys,

I´m trying to read an Evo X JDM with Ecuflash 1.42 and can´t get anything, anyone got a link for the xml and rom for this car?:confused1:

[GrayW]

Post up a screen dump after you have tried to connect.

[RJSP]

Hi Grayw,

I get this at the begging:

-- connecting to kernel --
[11:10:31.187] kernel get version
[11:10:31.187] kernel version is : OpenECU Mitsubishi M32186 CAN Kernel V1.09
[11:10:31.187] reading kernel comm buffer size
[11:10:31.187] comm buffer size set to 1024
[11:10:31.187] reading kernel flash buffer size
[11:10:31.187] flash buffer size set to 4096

and this at the end:

kernel read area: addr: 000FFC00 len: 0400
[11:11:02.031] -- unloading kernel --
[11:11:02.031] kernel reset
[11:11:04.140] -- unlocking ECU --
[11:11:04.140] starting session...
[11:11:04.140] requesting seed...
[11:11:04.156] sending key...
[11:11:05.406] -- resetting ECU --
[11:11:06.828] -- reading ECU ID --
[11:11:06.953] ECU HW part number : 1860A932
[11:11:06.968] ECU SW part number : 1860A93200
[11:11:07.000] VIN : CZ4A-0000689
[11:11:07.000] interface close
[11:11:07.031] interface close

A rom image is cretaed but then ask me if I want to create a new rom definition and I can´t move from there...

By the way it is a 2007 Evo X RS JDM.

Thanks a lot,

Ricardo

[GrayW]

Save both of these files in your rom data directory, and then try and reread the ECU.