View Full Version : Tephra mod for JDM Evo 8?
Lucifus
08-03-2009, 07:59 AM
Hi im new on here. Ive been spending some time searching and reading up on tephra mod. I like the idea of valet mode etc that it comes with. Which Rom file should I use though for JDM E8 GSR? From what ive read it doesnt work with my car 93660005 - Initially I just want the standard tephra extras and a second map with some pops and bangs for fun but for future I would like to look at more power mapping. Anyone know what ROM I should use and also if there are know issues with using the ROM? Also where is the cheapest place to pickup a limitless cable at the moment? £95 seems pretty steep.
Lucifus
caesarson
08-03-2009, 08:12 AM
I was advised that ROM 96260009 is what you need for a JDM VIII. I can email it over if you want
£95 is right. It's because of the exchange rates. Mine was £60 at the best exchange rate
Lucifus
08-03-2009, 08:15 AM
Is 96260009 running ok for you?
Lucifus
08-03-2009, 08:21 AM
Ive found the ROM now but my ecuflash doesnt have the xml. Can you email me this plaease?
caesarson
08-03-2009, 08:39 AM
mod's already on.
check the ROM before you flash it. But get yourself plenty of advise from the geeks before you go out with it
you may also need to add an immob table
Lucifus
08-03-2009, 08:43 AM
Thanks. Ill add this and check it out. Im still a long way off flashing my ecu. Need to do a lot more ready first i think.
GrayW
08-03-2009, 08:52 AM
96260009 with run the VIII GSR (6 speed), the rom has been slightly modified to do this as it was designed for an VIII MR.
Lucifus
08-03-2009, 08:55 AM
96260009 with run the VIII GSR (6 speed), the rom has been slightly modified to do this as it was designed for an VIII MR.
OK - Ive just downloaded the fix 2 one from the tephra thread on evom. What do i need to edit on it so it works on my non mr 8?
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.