Anyone with latencies & Scalings for Precision 1200cc injectors

[Gt35r!]

Hi,
need latencies & scalings for Precision 1200cc injectors......and can ne one help me out as my car is going lean after 7000rpm till 8000rpm.....the afr drops from 10 to 12 b/w these ranges.....
thanx

[Lee5]

What fuel system do you have ?

Lee

[Gt35r!]

apart from walbro 255 and inj its stock

[Gt35r!]

i also have a blox fmu installed

[Gt35r!]

can u help me out with the pops n bangs in ALS...what settings to put in....i am running 80700010 rom.... GTA7 5spd manual convert....just altered it to include ALS n Tephra mods...

[neilm]

can u help me out with the pops n bangs in ALS...what settings to put in....i am running 80700010 rom.... GTA7 5spd manual convert....just altered it to include ALS n Tephra mods...

http://www.geekmapped.com/forums/showthread.php?t=147&highlight=sas+setting

have a read here

[Lee5]

If the fuelling is fine across the whole of the other rev range, I would say you need to upgrade the fuel system as the stock pump will not be flowing enough fuel at the high rpm.

You could hardwire it as above, fit a fpr or even go over to a 044.

Lee

[Gt35r!]

http://www.geekmapped.com/forums/showthread.php?t=147&highlight=sas+setting

have a read here

read the post...put the exact timing and als values......n there was nuthin....no pops n bangs.....i am runnin gt35r it spools @ 4500rpm.....do i need to alter more cells in the timing table?.....how can i get pops n bangs when the car is revved in stationary mode?....

[neilm]

read the post...put the exact timing and als values......n there was nuthin....no pops n bangs.....i am runnin gt35r it spools @ 4500rpm.....do i need to alter more cells in the timing table?.....how can i get pops n bangs when the car is revved in stationary mode?....

this will only work when the car is been driven ie on over run when you let off the gas

[todd]

did you change the timing retard limit

[Gt35r!]

even took it for a spin nuthin happened

@ todd how do u change the timing retard limit?

it does display well over -24 in the cells in the ignition tables

[todd]

IS Ignition retard limit or Timing retard limit displayed in your rom ??? what rom id

[Gt35r!]

i did put in the -ive timings in "Boost inhancement adv/retard Map1&2"...still nuthin..

rom 80700010...dont hav those options u stated
plus i also run 90550001...

[neilm]

IS Ignition retard limit or Timing retard limit displayed in your rom ??? what rom id

todd what does this do ?

i take it its the max limit of - timing you can put in but i thought the max was -10 on 90550001

[todd]

limits how far the timing can retard default is 203 iirc thers another scaling somewhere that shows it in degrees but anyway it wont go lower than -10

[todd]

i did put in the -ive timings in "Boost inhancement adv/retard Map1&2"...still nuthin..

rom 80700010...dont hav those options u stated
plus i also run 90550001...

put those back to std settings they are mis named
add this to your 90550001 xml set it to 255 and blank the egr valve if you have one


<table name="Ignition retard limit" category="Timing" address="173e" type="1D" level="1" scaling="uint16"/>

[Gt35r!]

put those back to std settings they are mis named
add this to your 90550001 xml set it to 255 and blank the egr valve if you have one


<table name="Ignition retard limit" category="Timing" address="173e" type="1D" level="1" scaling="uint16"/>

Done every thing....still doesnt work.....even took tht logs..they do show timing till -10....

my turbo spools around 4.5k....should i put in 6k rpm in "ALS minimum RPM to trigger".....:unsure:....I m out of options