how to log wb through ecu, evo 8

[mcauto]

car - Evo 8

i have a AEM wideband 02 sensor and gauge installed just wondering if i can connect it to the ecu and log the wideband through it....

this is what i have:

-RED (Power) Connect to a 10v-18v power source.
-BLACK (Ground) Connect to a clean grounding point.
-WHITE (Analog Output) Connects to any auxiliary unit with a 0-5v input.
-BLUE (Serial Output) Connects to a RS-232 com port. (This output is optional)

http://www.aemelectronics.com/wideband-air-fuel-systems-15/digital-wideband-air-fuel-gauge-25/

[neilm]

you need the white and find a spare adc input on the ecu
if i recall you can use your 2nd o2 sensor that is now gone

you will have to mod evoscan too

[mcauto]

you need the white and find a spare adc input on the ecu
if i recall you can use your 2nd o2 sensor that is now gone

you will have to mod evoscan too

cool we will have to look into that so

[neilm]

cool we will have to look into that so

i have ecu pins too


have read here :smile:

http://www.geekmapped.com/forums/showthread.php?t=337&highlight=wideband&page=2