Evo 3 ecu

[TGSR3]

Hi People

Im new to this site hope someone could help me out.

I have a e3 with a fully forged engine and gt30 turbo.It has a std ecu so could someone let me know what i could do with the std ecu.I would like to run 1.5-1.6 bar of boost.I am going to put some 750cc injectors could you do this on a std ecu:confused1::confused1:

Thanks

[jacko32]

Hi People

Im new to this site hope someone could help me out.

I have a e3 with a fully forged engine and gt30 turbo.It has a std ecu so could someone let me know what i could do with the std ecu.I would like to run 1.5-1.6 bar of boost.I am going to put some 750cc injectors could you do this on a std ecu:confused1::confused1:

Thanks

Im not a fully qualified geek fella, far from, but i currently run a 3052, i run 700cc SARD injs, with a D Jet & AVCR. think ure best bet, obviously depending on ya ££££ circumstances would be to go for a flashed e7 ecu mate, i think they will work with the correct harness, best bet either ask Andy, Gray or Lee5 on here mate & they'll point you in the right direction :smile:

[TGSR3]

Im not a fully qualified geek fella, far from, but i currently run a 3052, i run 700cc SARD injs, with a D Jet & AVCR. think ure best bet, obviously depending on ya ££££ circumstances would be to go for a flashed e7 ecu mate, i think they will work with the correct harness, best bet either ask Andy, Gray or Lee5 on here mate & they'll point you in the right direction :smile:

Thanks for info

Hopefully one of those guys named above will help me out and explain abit more on the e7 ecu and what could i do with that in the car also the price it would cost to do and who would do this work.

thanks again

[AndyF]

You have a couple of options really.

You can go for an E7/8 ECU and utilise ECUFlash which has quite a lot of good features already setup or you can retain your std ECU and use an Ostrich emulator however there is less work being done on that as it's mainly just me that's working on the disassembly.

Andy

[TGSR3]

Thanks for the info guys

you have pm AndyF

[evonut270]

as per andys reply.i opted for the evo 8 ecu as there is only a handfull that i know of that have them mine being one of them.