Pops and bangs not working

[stu VI]

After getting my CEL and AYC light off, I decided to add the ALS settings to my rom.

However, nothing and I mean nothing is happening. I flashed an RA rom just before I got my VII ecu fitted to my VI with some negative timing. My VI was popping pretty good.

I added the settings Cossie1 suggested on the MLR to my new map and nothing seems to be happening.

Since I have removed the VI ecu and fitted the VII I have added a tial DV, previously SSQV. Top intercooler hardpipe, hard intake pipe, new walbro, new fuel filter.

I am lost as to why I not getting anything. I can post my map if that would help shed some light

Cheers

[evonut270]

is your ALS active?

[stu VI]

Is it not on constantly when It's mapped in to the rom?

[evonut270]

After getting my CEL and AYC light off, I decided to add the ALS settings to my rom.

However, nothing and I mean nothing is happening. I flashed an RA rom just before I got my VII ecu fitted to my VI with some negative timing. My VI was popping pretty good.

I added the settings Cossie1 suggested on the MLR to my new map and nothing seems to be happening.

Since I have removed the VI ecu and fitted the VII I have added a tial DV, previously SSQV. Top intercooler hardpipe, hard intake pipe, new walbro, new fuel filter.

I am lost as to why I not getting anything. I can post my map if that would help shed some light

Cheers
post up your map

[stu VI]

Let me know if this works mate

210

[Lucifus]

Stu - im pretty sure the SAS system doesnt work with atmpshperic bov. It needs to be recirculated for the als/sas system to work.

[GrayW]

They can be made to work with VTA.

[Cossie1]

You need to change the speed from 20 - 24.

Change the RPM from 2500 - 3000

ALS Trigger valid time change to 2.0

ALS minimum time to trigger change to 2.0

[williams12]

Let me know if this works mate

210

that xml is needed to open the file?

Regards