PDA

View Full Version : can anyone help me?


philevo4
26-05-2009, 10:13 AM
hi all

bit of a newbie to mapping etc, building engine and fixing cars no problem but i cant get my head around all the numbers and digits involved in mapping lol.

my question is, is there anyone that is resonably close no norwich that want to (for a fee) map my car for me?

its a evo 4 with a fully forged evo 8 engine, cams, greddy td06 25g turbo etc (will send full spec if anyone is interested in the job), i have a evo 8 260 ecu ready to be fitted and some bigger injectors (680cc) i already have 560's in.

i obviously cant fit the 260 ecu straight away as it still has the imobiliser active so it would need the wiring mods done and then mapped.
i'd like switchable maps one with launch control if poss.

im willing to travel to the anyone willing to do it and pay decent money.

i dont want to just buy a lead and start to do it and blow up alot of hard work that me and others have put in to the car.

i understand that i wont be taking it to a company and that i wont have a warrenty etc and that if anything happens it will down to me.

pm me if anyone is interested

GrayW
26-05-2009, 10:35 AM
Phil, the mods to fit the ECU are very simple (5 wires mods), and the basic rom to start the car can be emailed.

philevo4
26-05-2009, 11:42 AM
hi grayw, i dont mind doing that part but its the rest that i cant do lol, to flash the rom in to the ecu to start it i assume i will need the lead for that?
i no as soon as i get a lead i will start to play with things that i dont understand and knowing the luck im having at the min i will cause some damage or worse!

philevo4
07-06-2009, 03:38 PM
anyone?

GrayW
07-06-2009, 04:05 PM
You will need a tactrix 1.3 cable to allow flashing and logging.