XDF defintion file for tunerpro

[AndyF]

Latest version including anti-lag on launch control.

Please note that to be able to use the anti-lag / launch control features you will need to make modifications to the ECU code.

Andy

[puchtuner]

Hey Andy,

i need ah rom from an evo 3, is it possible to get one?

I get my car in 4 weeks an i want to learn it before i get it!

Thanks

[AndyF]

Standard early Evo ROM

but be aware that if you're using the above xdf file then some of the definitions are out of place because in the std ECU, the rev limit is in a different place and there is no code for the anti-lag or the launch control.

Andy

[Racedude]

Hi Andy,

Many thanks for the helpful files. Was wondering, how do you turn the ALS and Launch control off and on?

Thanks.
Racedude

[DEVOIX]

Latest version including anti-lag on launch control.

Please note that to be able to use the anti-lag / launch control features you will need to make modifications to the ECU code.

Andy


Change equation format for ignition table.
1*X-10
relates when logging with MMcd, iam happy to share my XDF

[DEVOIX]

Evo 1 - ed12a
evo 2 - ea24b
evo 3 - ea24c

[AndyF]

Change equation format for ignition table.
1*X-10 relates when logging with MMcd, iam happy to share my XDFNot on the Evo's you don't as confrimed when logging with pocketlogger ;) ;) You do need to change it for DSM's though.

Andy

[AndyF]

Hi Andy,

Many thanks for the helpful files. Was wondering, how do you turn the ALS and Launch control off and on?

Thanks.
RacedudeOnly just realised I hadn't answered this.... :blushing:
The ALS/launch control is activated when the car is stationary. When the car is stopped and you hold your foot wide open on the throttle then the new code will hold the revs at whatever value you set them to and retard the timing to give you the extra boost to get you off the line.

Hope that helps

Andy

[Smutt]

Hi Andy,

Do you have a datastream definiton file to suit GSR or Evo 1, 2 or 3?

Forged GSR 1.8ltr 1993. Using evo injectors and AFM, Lancer GSR socketed ECU with Ostrich 2.0 etc.

Thanks

Sam

[steveyb_evo3]

Would the top xdf file be ok to put on and use my chip program I had on b4 that was set up for the car it's just that I lost my xdf's lol or do I have to change anything

[AndyF]

Steve,
The xdf above *should* be OK but it depends upon if you've got the LC/ALS or just launch setup.

If you can post up a copy of your bin file then I can post up an xdf for you to use.

Cheers

Andy

[steveyb_evo3]

ok cheers andy

[steveyb_evo3]

there u go mate cheers andy i wanted to drive the car tomorrow but the xdf i used is awfull lol

[AndyF]

You do realise that it's a double sized bin file Stevey that has switchable images.

You need the 'basic' xdf as well as the file doesn't have launch control etc. written into it

You can use the xdf above but ignore anything to do with rev limit / launch control / ALS and you'll be fine.

This also assumes that you're running on the 1st bin file on the chip and not on the 'switched' version.

Andy

[steveyb_evo3]

Ooo I have no Idea lol when I upload it it just goes on lol that's the program I sent u in chip form and u turned it in it that file for me ?

[steveyb_evo3]

any of these simpler to start with?