CLaNZeR
28-01-2009, 10:16 PM
Okay not Mapping but Diagnostic Logging.
Tried to attach the file rather than shamelessy point a link to my site, but 327K attachment limit?
Come on guys, no more than 5 pictures in a post and attachments too small :lol:
So here is direct dowmload link:
http://www.myrollingroad.com/showthread.php?t=103
Version 1.8 of Mut Monitor.
This application uses the Mitsubishi MUT Protocol for monitoring data from the Vehicles ECU.
It can be used with OBD-II serial cables as well as FTDI based cables via Direct calls or Virtual Com Ports. At this time it seems to be the only application that will Log with the Tactrix OpenPort V2.0 Cable on Mitsubishi Vehicles.
Now works with CLaNZeR's USB-PIC-OBD Cable at high logging speeds.
Check the cable out here:
http://www.myrollingroad.com/showthread.php?t=80 (http://www.myrollingroad.com/showthread.php?t=80)
Main Changes for Version 1.8 are:
Added ability to change Log Location.
Main feature of this release is being able to edit the Formula's(Calculations) for each Request. Simply Click on the Request Name that is in light green on the grid and a new window will appear as shown below.
Fixed a few little bugs.
http://www.myrollingroad.com/OBD/mutmonitor18-1.jpg
http://www.myrollingroad.com/OBD/mutmonitor18-2.jpg
Tested exhaustedly with
Serial OBD-II Cable
VAG - COM clone FTDI Cable
Tactrix OpenPort 2.0 Cable
CLaNZeR USB-PIC-OBD Cable
CLaNZeR U-OBD Cable
Cheers
Sean.
Tried to attach the file rather than shamelessy point a link to my site, but 327K attachment limit?
Come on guys, no more than 5 pictures in a post and attachments too small :lol:
So here is direct dowmload link:
http://www.myrollingroad.com/showthread.php?t=103
Version 1.8 of Mut Monitor.
This application uses the Mitsubishi MUT Protocol for monitoring data from the Vehicles ECU.
It can be used with OBD-II serial cables as well as FTDI based cables via Direct calls or Virtual Com Ports. At this time it seems to be the only application that will Log with the Tactrix OpenPort V2.0 Cable on Mitsubishi Vehicles.
Now works with CLaNZeR's USB-PIC-OBD Cable at high logging speeds.
Check the cable out here:
http://www.myrollingroad.com/showthread.php?t=80 (http://www.myrollingroad.com/showthread.php?t=80)
Main Changes for Version 1.8 are:
Added ability to change Log Location.
Main feature of this release is being able to edit the Formula's(Calculations) for each Request. Simply Click on the Request Name that is in light green on the grid and a new window will appear as shown below.
Fixed a few little bugs.
http://www.myrollingroad.com/OBD/mutmonitor18-1.jpg
http://www.myrollingroad.com/OBD/mutmonitor18-2.jpg
Tested exhaustedly with
Serial OBD-II Cable
VAG - COM clone FTDI Cable
Tactrix OpenPort 2.0 Cable
CLaNZeR USB-PIC-OBD Cable
CLaNZeR U-OBD Cable
Cheers
Sean.