ROM request RA186501R1

[DanielN]

Can someone help me with the ROM RA186501R1?

This is a Ralliart RA186501R1 or RA186576R1 or RA186401R1

The maps must work without a air restrictor.

It must be a stock map is possible.

I will really appreciat any help.

I will send my email address by PM if somebody can help me with this issue.


Thanks

[GrayW]

What do you need help with?

[DanielN]

I need the proper map for GSR IX

I bought this ECU from Poland for a Evo IX GSR Euro

The problem is that it has inside a evo viii ralliart map (99270000)

This is not a Evo VIII ralliart ecu.

I need to make this ECU running until next race that will be at the end of the month.

I need this rom for non-restrictor 32" GSR and for unleaded premium gasoline without air restrictor.

Also RA186501N2 it will be good evan if this map is for FIA gasoline restriction.

What I need is or RA186501R1 or for high-octane fuel RA186501N1.

If you have RS (RA186401R1 ,RA186401N1) or GT(RA186576R1 ,RA186576N1) it will be great also.

I was not able to find nothing until now.

[DanielN]

Anybody????

[evonut270]

i think you will struggle to find that rom anywhere.

[DanielN]

I think so......

Seems that I must buy the ECU from Japan in order to get it.

Never mind....I will try to find it and if not this is it....

I know is hard to find but maybe I will find somebody who want so sell it also....

[evonut270]

I think so......

Seems that I must buy the ECU from Japan in order to get it.

Never mind....I will try to find it and if not this is it....

I know is hard to find but maybe I will find somebody who want so sell it also....iv no doubt someone will have it.why do you not run an FQ-360 map?

[DanielN]

Because I must implement it on a EDM GT Evo 9 and FQ360 seems to hard for the car.The car started with fq360 but with cell codes on and I need to know exactly what to disable in periphery bits in order to run the map safe.I did not found yet all the main differences between those version of FQ.Except dual solenoid that I know from FQ I miss a lot of infos about FQ`s in order to understand exactly what to change or not.I have also a FQ 320 evo 9 ecu unit and a piggy back ecu unit that upgrades evo 9 ECU to the fq340 ncluding wiring diagram (SR010235 part number) but I did not test it yet.

[GrayW]

You need to tell use what CEL's you are getting to start with. Or a better idea is to just copy the 360 Ignition, fuel, boost, to your original rom.

[DanielN]

You need to tell use what CEL's you are getting to start with. Or a better idea is to just copy the 360 Ignition, fuel, boost, to your original rom.

I did that and it`s ok
First cell that I get was one of those :

DTC P0106: Barometric Pressure Circuit Range/Performance Pro
DTC P0107: Barometric Pressure Circuit Low Input
DTC P0108: Barometric Pressure Circuit High Input

I don`t remember witch one......

[DanielN]

Curious was that with 88590015 I`ve got more than 3 codes comparing with 08UK

[DanielN]

Help me please with a full technical specks for FQ360 models.I have some technical differences but I`m courious what camshafts they add to 360 comparing with 320 or 340 (if there is a difference).Anyway somebody saw fq400 rom?How it`s look like?They use ECUTEK right?Maps are similar with the 360?From where they get 400bhp with a so called "stock car"???

[DaNy]

http://www.socalevo.net/forum/index.php?topic=70402.0

[GrayW]

They are not IX tables, they are 09 Rallart and X ones.